Laser Welding Technology

In recent years, the production and manufacturing technology of hardware bathroom products has been continuously innovated. The application of optical laser technology in hardware bathroom products includes welding, marking and cutting. Laser welding has high aspect ratio in the welding of hardware and bathroom products, welding seam width, heat affected zone, small deformation, and fast welding speed; the welding seam is flat and beautiful, and no treatment or simple treatment process is required after welding; the welding seam quality is high , No pores, high welding strength; can be precisely controlled, easy to achieve automation; can achieve welding between certain dissimilar materials. Laser marking on hardware bathroom products has good permanence, strong activity, safety and environmental protection, simple operation and wide range of applicable materials. The cutting of laser cutting on hardware and bathroom products can complete the cutting of plates of any shape, with fast processing speed, high efficiency, low cost, high cutting accuracy, smooth section, no stress deformation, no need for secondary processing, and improved yield and reduced cost.

You can click this picture to check it :

If You Have Any Questions,Please Contact To Us:

Dalian Honeybee CNC Equipment Co.,Ltd

Add:No.78, Xinshuini Rd., Ganjingzi Dist., Dalian City,116033, China

Cell/ WhatsApp / Wechat:+86-159 4081 6686

Tel:+86 411 62661646          Web:http://www.honeybee-cnc.com

Email:[email protected]

Mini portable cutting machine

Mini portable cutting machine:

The beam uses light structural design,with good rigidity structure, light deadweight.

The numerical control system disposes high,the performance is stable.

Cutting mouth is small, tidy,and avoid a second dressing processing.

You can click this picture to check it :

 

If You Have Any Questions,Please Contact To Us:

Dalian Honeybee CNC Equipment Co.,Ltd

Add:No.78, Xinshuini Rd., Ganjingzi Dist., Dalian City,116033, China

Cell/ WhatsApp / Wechat:+86-159 4081 6686

Tel:+86 411 62661646          Web:http://www.honeybee-cnc.com

Email:[email protected]

Laser Cutting Technology

Laser Cutting Technology

Laser cutting is one of the most important cutting technologies in the laser processing industry. Laser cutting technology is an important part of laser processing technology, and it is also one of the more advanced cutting processes recognized in the world. With the continuous development of social production and the continuous progress of industrial processing technology, laser cutting technology is also developing and progressing rapidly. effect.

China has gradually become an international processing and manufacturing center, and the demand for metal processing is increasing. In the metal processing industry, electrical control boxes, machine casings, etc. are generally sheet metal parts, so the demand for sheet metal processing capacity is also increasing. , the complexity of the process is also relatively high, and even some parts have dozens of processes, which also puts forward higher requirements for sheet metal processing in terms of precision.

Traditional sheet metal processing includes cutting, blanking and bending processes. The blanking process requires a lot of molds and wastes a lot of time and capital costs.

Laser cutting is an efficient and high-quality flexible processing technology. Laser sheet metal processing does not require molds. Compared with traditional processing methods, it is simpler to operate, more flexible, and has lower operation and maintenance costs.

Laser Cutting Machine Product Category:

 

If You Have Any Questions,Please Contact To Us:

Dalian Honeybee CNC Equipment Co.,Ltd

Add:No.78, Xinshuini Rd., Ganjingzi Dist., Dalian City,116033, China

Cell/ WhatsApp / Wechat:+86-159 4081 6686

Tel:+86 411 62661646          Web:http://www.honeybee-cnc.com

Email:[email protected]

USA Hypertherm Powermax Error 0-30

0-30 error a common problem with Powermax series plasma power supplies. When encounter  0-30 error, first distinguish whether the specific alarm number is 0-30-0 or 0-30-1.

0-30-0 means that the electrode and the nozzle are not in contact after the start signal is received. When encountering this alarm, we can check according to the order of “Consumables >> Gas circuit and solenoid valve >> Arc ignition IGBT >> Torch cable”.

0-30-1 means that after receiving the start signal, the electrode and the nozzle are not separated, or the separation is not timely. When encountering this alarm, we can perform the detection in the order of “Consumables >> Gas Path”.

How to check the specific alarm number

When the Powermax series air plasma fails, an error code is displayed on the LCD screen. As shown in Figure 1 below, we can enter the service interface, get detailed fault codes, and then follow the instructions below to diagnose. As shown in the figure below, it is the 0-30-0 alarm.

Error 0-30-0

1.Consumables inspection

Check if the consumables are installed correctly according to the current cutting process, or replace with a new set of consumables (all consumables on the torch) to test.

Carefully inspect the contact surfaces of the torch body and electrode if damage or corrosion.

2.Air and Solenoid Valve Inspection

The blow test can help us detect air circuit failures easily. Press and hold two buttons at the same time to enter the service interface (as shown in the figure below), press the button on the right with one finger, move the cursor to “G”, then turn the current adjustment knob, when “G” is adjusted to 1, the solenoid valve is turned on (blow air), the solenoid valve is closed (stop blowing) when “G” is reset to 0.

When blowing, observe the second line of P readings, before the slash is the air pressure set value, after the slash is the actual air pressure value. See how much the actual value of P is (the actual value should be close to the set value). Judging according to the actual value:

If the actual value has been fluctuating and cannot be stable, and the solenoid valve is constantly exhausting, then there is a problem with the solenoid valve, please replace the solenoid valve.

If the actual value is always lower than the set value, it means that the external air supply pressure and flow is insufficient. Please check whether the air pipe is leaked, twisted or blocked, and whether the air filter is blocked or leaked.

If the actual value does not change, and the actual value also has a value when the air is not blown, then there is a problem with the gas pressure sensor, and the pressure sensor should be replaced.

Note: Poor gas quality, oil, impurities and moisture will greatly affect the life of the solenoid valve, causing the solenoid valve to be blocked, the sensitivity will be deteriorated, the closing is not strict, and it cannot be opened. Therefore, it is recommended that the customer must install a cold dryer and a three-stage filtration for the air circuit, and perform regular maintenance and replace the filter element.

3.Arc ignition IGBT detection

It can be tested with an IGBT tester, or you can manually short-circuit the IGBT for testing. Use a Ø6mm² wire to connect the double black wire and the positive wire. If the arc can not be started before, but the arc can be started normally after short-circuiting, then please replace the arc-starting IGBT. Note: It cannot be used for cutting after shorting here.

4.Torch cable internal cable continuity test

The torch cable can be checked according to the figure below, remove the consumables, and measure the connection point of the negative pole of the red wire on the power board to the connection point of the electrode, nozzle and negative pole on the torch body to the connection point of the nozzle and electrode on the torch body whether it is turned on. If the measurement does not pass, replace the torch lead.

Note: Sometimes it is necessary to unplug the arc voltage sampling line connected to the machine to test whether there is still a 0-30 error.

 

If You Have Any Questions,Please Contact To Us:

Dalian Honeybee CNC Equipment Co.,Ltd

Add:No.78, Xinshuini Rd., Ganjingzi Dist., Dalian City,116033, China

Cell/ WhatsApp / Wechat:+86-159 4081 6686

Tel:+86 411 62661646          Web:http://www.honeybee-cnc.com

Email:[email protected]

Table/Desktop CNC Cutting Machine

Table/Desktop CNC Cutting Machine:

Precise liner guide, dual drive and Japan servo motors (stepper motor is option), this machine can achieve high cutting speed and quality.

You can click here to check it :https://cloud.video.alibaba.com/play/u/2153292369/p/1/e/6/t/1/d/hd/266872099198.mp4

 

If You Have Any Questions,Please Contact To Us:

Dalian Honeybee CNC Equipment Co.,Ltd

Add:No.78, Xinshuini Rd., Ganjingzi Dist., Dalian City,116033, China

Cell/ WhatsApp / Wechat:+86-159 4081 6686

Tel:+86 411 62661646          Web:http://www.honeybee-cnc.com

Email:[email protected]

Sheet And Pipe Fiber Laser Cutting Machine

Sheet And Pipe Fiber Laser Cutting Machine:

(1). High rigidity heavy chassis, reducing the vibration generated during the high-speed cutting process.
(2). Gantry double-drive structure,with imported Germany rack & gear transmission system, which improves the production efficiency.
(3). High-performance cast aluminium guide rail, after infinite aalysis ,which accelerates the cicular arc cutting speed.
(4). High precision, fast speed, narrow slit, minimum heat affected zone, smooth cut surface and no burr.
(5). The laser cutting head does not come into contact with the surface of the material and does not scratch the workpiece.
(6). The slit is the narrowest, the heat affected zone is the smallest, the local deformation of the workpiece is very small, and there is no mechanical deformation.
(7). It has good processing flexibility, can process any pattern, and can cut pipes and other profiles.
(8). Non-deformable cutting can be performed on materials of any hardness such as steel plates, stainless steel, aluminum alloy plates, and hard alloys.

 

If You Have Any Questions,Please Contact To Us:

Dalian Honeybee CNC Equipment Co.,Ltd

Add:No.78, Xinshuini Rd., Ganjingzi Dist., Dalian City,116033, China

Cell/ WhatsApp / Wechat:+86-159 4081 6686

Tel:+86 411 62661646          Web:http://www.honeybee-cnc.com

Email:[email protected]